01384 671397 Mon - Fri 09:00 - 17:00 17 High St, Kinver, Stourbridge DY7 6HG
ADDRESS
17 High St, Kinver, Stourbridge, DY7 6HG
CALL US
01384 671397
GET A QUOTE

OIL AND GAS

Save Your Oil and Gas Operation from Expensive Downtime with Long-Lasting High-Performance Carlisle Belts

Over the last 20 years, we have designed and supplied premium quality drive belts to the world’s leading oil and gas companies. Our range of belts have been specifically adapted for high-performance on oil and gas machinery and are fully complemented by a range of speciality pulleys, sprockets and taper lock bushings.

Rotocure Banded Belts for Significantly Better Performance

Oilfield machinery, such as pump jacks, place an excessive demand on power transmission belts. Our range of heavy-duty belts features Aramid tensile cords, reduced stretch technology, and oil- and heat-resistant materials delivering market-leading durability.

Biggest and Best Selection of Powersports Belts in the World

We hold a full range of stock at our UK warehouse with a direct supply chain to our US factories providing a wider range of replacement belts and a much quicker lead time than any other supplier.

  • Extensive range of replacement belts designed for the demands of oil and gas machinery.
  • Unique EPDM rubber material and Kevlar tensile cord for improved strength and durability.
  • Engineered and manufactured in ISO 9001 facilities.
Machines
  • Mud Pump Belt Drives
  • Pump Truck Belt Drives
  • Injection Pump Drives
  • Cooling Tower Belt Drives
  • Gas Compressor Belt Drives
  • Pump Jack Belt Drives
  • Rock Crusher Belt Drives
  • Shale Shaker Belt Drives
  • Wellhead Compressor Belt Drives

Download Our Brochure


MAKE AN ENQUIRY

Image showing Super Blue Ribbon V-Belts by Carlisle Belts

Super Blue Ribbon V-Belt

The Super Blue Ribbon V-Belt is the finest wrapped belt in the industry with dependable performance on an extremely wide range of applications.

  • Stress-relieved heavy-duty fabric covering improves belt life and assures a smooth transfer of power.
  • Extremely wide range of applications and load capacities with 100 to 8000 RPM and 1 to 1,100 horsepower capability.
  • Perfect for mixers, pumps, conveyors, HVAC, and much, much more.

“RAW POWER” Super II V-Belt

The Super II V-Belt is uniquely constructed to deliver superior performance, strength and durability on the most brutal drive systems.

  • High-modulus polyester cord in the belt mid-section maintains extreme loads without stretching delivering greater strength, balance and longer life.
  • Raw-edge belt sidewalls minimise belt slip, noise and drive vibration through improved pulley grip.
  • Specifically formulated rubber compounds dissipate heat while providing oil, heat, and ozone resistance.
Image showing the Power Wedge Cog V-Belts by Carlisle Belts

Power-Wedge Cog-Belt

The Power-Wedge Cog-Belt features a narrow belt wedge design and raw edge performance for more grip and less slip.

  • EPDM rubber construction delivers superior flexibility and load carrying capacity at high and low temperatures without cracking or stretching.
  • High-modulus cords and precision moulded cogs for improved stability, heat dissipation and power efficiency at high horsepower.
  • Perfect for fans, pumps, HVAC, compressors and more.
Gold Ribbon Cog V-Belts by Carlisle Belts

Gold Ribbon Cog V-Belt

The Gold-Ribbon Cog-Belt is the industry’s best v-belt with significant reductions in downtime and energy savings across blowers, pumps, HVAC, and more.

  • Raw edge sidewalls and precision moulded cogs deliver a 95% efficiency improvement against competing v-belts.
  • Heat, dirt, grease and chemical-resistant EPDM rubber for longer belt life and maintenance of 95% efficiency rating over time.
  • Up to 30% more horsepower than conventional belts using the same drive space.
Image showing Gold-Ribbon Cog Banded Belts by Carlisle Belts

Gold-Ribbon Cog-Band Belt

The Gold-Ribbon Cog-Band Belt combines the longer life and superior performance of the Gold-Ribbon Cog-Belt with the stability and rollover prevention properties of a banded belt.

  • Two-layer highly engineered tie-band permanently bonds multiple belts together for smoother operation, even load distribution, vibration dampening, heavy shock load absorption and belt whip elimination.
  • Precision moulded cogs and raw-edge sidewalls deliver superior flexibility, reduced bending stress, and a tighter grip on pulleys for improved performance, efficiency and resistance to adverse conditions.
  • Perfect for blowers, fans, pumps and more.
Image showing the Carlisle Belts Agricultural Banded Belt an Agricultural Belt and Banded Belt for Combines, Harvesters, and Tractors

Super Vee-Band Banded Belt

The Super Vee-Band Banded Belt provides reliable performance for heavy-duty industrial applications with pulsating or stalling characteristics.

  • Static-dissipating rubber compounds provide superior resistance to oil and heat which is critical for tough industrial applications.
  • Patented banding processes permanently bond belts together to eliminate belt turnover, absorb heavy shock loads and distribute load and wear in drives subjected to fluctuating load tensions.
  • Perfect for rock crushers, vibrating equipment, saws, pumps and more.
Image showing the Carlisle Belts Agricultural Banded Belt an Agricultural Belt and Banded Belt for Combines, Harvesters, and Tractors

Power-Wedge Cog-Band Belt

The Power-Wedge Cog-Band Belt minimises belt whip and turnover on high horsepower or shock load drives with outstanding resistance to oil, heat and harsh environments.

  • Precision moulded cogs, raw-edge sidewalls and unique laminated construction maximise the transfer of power without belt whip, turnover or slippage.
  • Oversized polyester cord with chemical treatment provides maximum resistance to belt stretch and enhances belt strength and stability.
  • Perfect for high speed and horsepower drives such as fans, pumps, compressors and more.
Image showing the Carlisle Belts Agricultural Banded Belt an Agricultural Belt and Banded Belt for Combines, Harvesters, and Tractors

ARAMAX Wedge-Band

The Aramax Wedge-Band Banded Belt is designed for extraordinary belt strength on heavy-duty applications found in oil field equipment, rock and quarry applications, forestry industry applications and heavy construction machinery.

  • Extra-strong aramid cord for high horsepower capability and maximum protection against shock loads.
  • Double ply tie-band permanently bonds multiple belts for heavy shock load absorption, belt whip elimination, vibration dampening, and even load distribution.
  • Perfect for heavy-duty applications, oilfield mud pumps and more.
Image showing the Synchro-Cog HT Belts, Synchronous Belts by Carlisle Belts
Synchronous Belts

Synchro-Cog HT Belt

The Synchro-Cog HT Belt is an economical synchronous drive belt built for trouble-free power transmission.

  • Treated fibreglass cord for superior length stability, flexibility, and high tensile strength across heavy shock loads.
  • Specifically formulated rubber backing, and nylon fabric teeth covering for more efficient and stronger belt performance.
  • Perfect for use in blowers, mixers, machine tools, sewing machines, food processing, paper processing and more.
Image showing the Synchro-Cog HT Belts, Synchronous Belts by Carlisle Belts
Synchronous Belt

Synchro-Cog Timing Belt

The Synchro-Cog Timing Belt is built with trapezoidal tooth profiles for applications where synchronisation between the driving and driven units is required.

  • Moulded shear resistant trapezoidal teeth and tensile cord for assured smooth and positive meshing with the sprocket.
  • Oil, heat and abrasion resistant with no lubrication required for clean, maintenance free performance.
  • Perfect for inaccessible drive systems and machine tools, sewing machines, packaging equipment, vending machines, food processing equipment and more.
High-Performance Synchronous Belt

Panther XT

The Panther XT is a high-torque synchronous drive belt and a powerful alternative to chain or polyurethane belts.

  • Low friction tooth fabric for significant noise reduction and more efficient operational efficiency.
  • Extra-strong carbon cord construction for reduced downtime and higher drive belt durability
  • Perfect for use in printing machinery, textile equipment, packaging machinery, compressors, roller chain drives, and more.
High-Performance Synchronous Belts

Panther

The Panther is designed to offer higher torque capacity than conventional synchronous belts.

  • Strong Ultra-Cord non-aramid fibre tensile deliver strength and dimensional stability
  • High-performance advanced polymer teeth for 98-99% operating efficiency and abrasion-resistance.
  • Perfect for use in conveyors, blowers, packaging equipment, machine tools, industrial machinery and more.
Image showing the Panther Synchronous Belts by Carlisle Belts

ACHE Synchronous Belt

The Air Cool Heat Exchange Belt is manufactured with Z-twist construction for vertical shaft drives and upward lateral movement.

  • RPP profile for greater transfer of power and tooth shear and jump resistance.
  • Ultra-Cord tensile member for improved belt life and higher strength.
  • Perfect for HVAC and air-cooled heat exchangers.

V-Belt Pulleys

The MARTIN V-belt pulleys and sheaves meet the toughest industry demands while continuing the MARTIN tradition of unparalleled manufacturing standards. Our direct access to the Martin factories in the US gets product from the East Coast to our UK warehouse with quicker lead times than other European competitors.

  • Available in 1-12 groove specifications
  • V Pulleys Taper Bushed versions all available

FHP Sheaves and Pulleys

We offer a range of Martin FHP Pulleys and Sheaves available with one or two grooves for light duty applications such as lawn and garden applications.

“AK” sheaves are made to accommodate A section and 4L section belts.

“BK” sheaves are made for both A section (4L) or B section (5L) belts.

The two lines of sheaves have identical pitch diameters when using A or 4L belts.

  • Fractional Horsepower Sheaves for light duty applications
  • Available Bored-to-Size and MST® Bushed
  • Precision machined grooves available in single & double groove designs
  • Statically balanced (Dynamic balancing available)

Variable Pitch Sheaves and Pulleys

Our range of Martin variable speed sheaves enables designers and engineers to increase or decrease the speed of the driven machine. In doing so, they allow for variances in the amp draw of the motor to maximise efficiency and increase or decrease static pressure and air flow.

  • Stationary adjustable speed sheaves
  • Precision machined grooves available in single & double groove designs
  • Full range of popular bore sizes including keyway and setscrew
  • Statically-balanced with positive locking system (dynamic balancing available)

Spun Pulleys

CRP offers a range of spun steel pulleys including split, spun, stamped & welded/riveted, machined, and cast pulleys which are integrally fixed to OEM machinery.

Our systems approach with our OEM partners allows us to analyse the initial drive and take control of the entire belt drive system for smoother running and quality throughout.

  • Our range of Diameters vary from 2½” to 8½”
  • Bored, keyed or splined to your specification
  • Base steel spun pulleys coated and plated to OEM specifications
  • Fully Tested Drive System for reassurance
QD_Bushings

QD Bushings

Our range of Martin steel QD® bushings feature torque capacity from 1,500 to 20,000 pounds and offer a range of bore sizes from ½” to 3″.

Visit our catalogue for hundreds of easy-to-install QD® bushings in all of the most common sizes and a direct supply chain which gets your bushings delivered at the right time for the right price, including:

 
  • H
  • SH
  • SD
  • SF
  • JA
  • SDS
  • SK
  • E

Taper Lock Bushings

We offer a full range of easy-to-fit taper lock bushings which are manufactured to meet the most demanding standards and tolerances. Our stock taper lock bushings are used to complete the CRP drive system with bore sizes from ½” to 3″ and Metric bores of 14mm to 55mm in a variety of sizes, including:

 

  • 1008
  • 1215
  • 1615
  • 2525
  • 1108
  • 1310
  • 2012
  • 3020
  • 1210
  • 1610
  • 2517
  • Timing Belt Pulleys and Sprockets

    Our range of Martin timing pulleys and sprockets are manufactured to extremely close specifications and are stocked in minimum plain bore, taper bushed, and QD bushed styles depending on size and pitch.

    Our pulleys are made in five stock pitches to handle a wide range of loads, speeds and applications at the highest possible efficiencies. Circular pitch (usually referred to as pitch) is a basic consideration in the selection of timing pulleys as with gear and chain drives.

    Bushings are priced separately and must be added to pulley price.

    • Available in imperial widths
    • Peripheral axial grooves for positive engagement with the belt mating teeth
    • Available Bored-to-Size in QD and Taper bushings with or without Flanges

    HTD Pulleys and Sprockets

    Our range of Martin HTD and high-performance pulleys and sprockets are manufactured in various sizes, dimensions and capacities to meet industry requirements. This includes a wide range of loads, speeds, and demanding applications.

    Martin’s High HP HTS Sprockets are designed to run with today’s highest horsepower RPP® profile belts and allow you more flexibility in your selection criteria. The expanded line allows you to fit the application with the most cost-effective sprockets and match your sprocket to your favourite belt.

    • Positive direct tooth engagement without lubrication.
    • Wide speed range and load capabilities       
    • Constant Driven Speeds and available in imperial widths
    • Available Bored-to-Size in QD and Taper bushings with or without Flanges

    Oilfield Chains

    Drives Chains by TIMKEN are manufactured for high-performance across the toughest industries and markets. The unique Oilfield Chains range includes a complete line of precision roller chains, attachment chains, engineered chains, and corrosion-resistant chains built to American Petroleum Institute (API) requirements.

    Oilfield Chains by Drives are suitable for use on oilfield applications including: draw works, rotary tables, mud pumps, mobile rigs, power tongs, lift pumps and directional drilling.

    • Precision Roller Chains
    • Attachment Chains
    • Engineered Chains
    • Corrosion-Resistant Chains

    Download Our Brochure


    MAKE AN ENQUIRY