01384 671397 Mon - Fri 09:00 - 17:00 17 High St, Kinver, Stourbridge DY7 6HG
ADDRESS
17 High St, Kinver, Stourbridge, DY7 6HG
CALL US
01384 671397
GET A QUOTE
 

V-BELTS

V-Belts are the Industry’s Leading Drive Belt Delivering Superior Power Transmission Performance Across a Range Of Industrial Applications..

V-Belts are trapezoidal-shaped belts made of rubber polymers which fit into the grooves of pulleys with better alignment, grip and stability over traditional flat belts. V-belts combine traction and speed of movement to provide longer belt life and power transmission performance.

The dynamic properties of v-belts mean as the load is increased the belt wedges further into the pulleys improving the transmission of torque and reducing the width and tension requirement of the drive system. Swapping traditional belts for v-belts in your drive system saves on energy and space while delivering higher power transmission and less hassle overall.

Gold Ribbon Cog V-Belts by Carlisle Belts

Gold-Ribbon EPDM Cog V-Belt

The Gold-Ribbon Cog-Belt is the industry’s best v-belt with significant reductions in downtime and energy savings across blowers, pumps, HVAC, and more.

  • Raw edge sidewalls and precision moulded cogs deliver a 95% efficiency improvement against competing v-belts.
  • Heat, dirt, grease and chemical-resistant EPDM rubber for longer belt life and maintenance of 95% efficiency rating over time.
  • Up to 30% more horsepower than conventional belts using the same drive space.
Image showing Super II V-Belts by Carlisle Belts

Super II EPDM V-Belt

The Super II V-Belt is uniquely constructed to deliver superior performance, strength and durability on the most brutal drive systems.

  • High-modulus polyester cord in the belt mid-section maintains extreme loads without stretching delivering greater strength, balance and longer life.
  • Raw-edge belt sidewalls minimise belt slip, noise and drive vibration through improved pulley grip.
  • Specifically formulated EPDM compounds that are static conductive, resistant to heat, and prevent hardening and glazing.
Image showing Super Blue Ribbon V-Belts by Carlisle Belts

Super Blue Ribbon V-Belt

The Super Blue Ribbon V-Belt is the finest wrapped belt in the industry with dependable performance on an extremely wide range of applications.

  • Stress-relieved heavy-duty fabric covering improves belt life and assures a smooth transfer of power.
  • Extremely wide range of applications and load capacities with 100 to 8000 RPM and 1 to 1,100 horsepower capability.
  • Perfect for mixers, pumps, conveyors, HVAC, and much, much more.
Image showing the ARAMAX Xtra Duty V-Belt by Carlisle Belts a V-Belt for outdoor power equipment including lawnmower belts, edges, and snow blower belts.

ARAMAX Xtra Duty V-Belt

The Aramax Xtra Duty V-Belt is specifically designed for aggressive applications and outdoor power equipment with heavy shock loads and backside-idlers.

  • Superior clutching fabric with increased thread count for resistance to rollover, smoother clutching, and improved belt performance.
  • Extra-strong aramid tensile cords with heat and oil resistance for increased strength and durability and reduced stretch.
  • Perfect for outdoor power equipment, lawnmowers, edgers, snow blowers and heavy duty agricultural machinery.
Image showing the Power Wedge Cog V-Belts by Carlisle Belts

Power-Wedge EPDM Cog V-Belt

The Power-Wedge Cog-Belt features a narrow belt wedge design and raw edge performance for more grip and less slip.

  • EPDM rubber construction delivers superior flexibility and load carrying capacity at high and low temperatures without cracking or stretching.
  • High-modulus cords and precision moulded cogs for improved stability, heat dissipation and power efficiency at high horsepower.
  • Perfect for fans, pumps, HVAC, compressors and more.
Image showing Metric Power Wedge Cog V-Belts by Carlisle Belts

Metric Power-Wedge EPDM Cog V-Belt

The Metric Power-Wedge Cog-Belt features a narrow belt wedge design and raw edge performance for more grip and less slip.

  • EPDM rubber construction delivers superior flexibility and load carrying capacity at high and low temperatures without cracking or stretching.
  • High-modulus cords and precision moulded cogs for improved stability, heat dissipation and power efficiency at high horsepower.
  • Perfect for fans, pumps, HVAC, compressors and more.
Image showing Super Blue Ribbon V-Belts by Carlisle Belts

Super Power-Wedge V-Belt

The Super Power-Wedge V-Belt enables the design of more compact belt drives and is perfect for use in applications requiring longer belt lengths.

  • Multi-layered compression section with fibre reinforcements provides excellent support to the cord line while maintaining belt flexibility.
  • Heavy duty stress-relieved fabric cover protects against harsh environmental conditions, oil, grease, and heat to deliver longer belt life.
  • Perfect for pumps, mixers and more.
Image showing the Double-Angle V-Belts by Carlisle Belts ideally suited for Serpentine Drives

Double Angle V-Belt

The Double Angle V-Belt is ideally suited for serpentine drives with significant reductions in noise from both sides of the belt.

  • Double wrapped heavy-duty fabric provides excellent resistance to abrasive wear, heat, ozone, grease, oil, and dirt for longer belt life and improved performance.
  • Special synthetic rubber compounds at the core of the belt provide longer v-belt life and superior horsepower capacity.
  • Perfect for conveyors, mills, cooling or heating drums, and more.
Image showing the Raw-Edge Bandaid V-Belts by Carlisle Belts

Durapower II Raw-Edge FHP V-Belt

The Durapower II Raw-Edge FHP V-Belt combines the advantages of Raw Edge technology with centralised belt cords for greater flexibility and stability in high shock load applications.

  • Fiber-loaded stiff-flex premium quality rubber for better and stronger v-belt performance at low cost.
  • Raw-edge sidewalls and compressed rubber sections for further drive system efficiency and resistance to oil, grease, dirt and ozone.
  • Perfect for HVAC, fans and more.
Image showing the Raw-Edge Bandaid V-Belts by Carlisle Belts

Raw-Edge Bandaid Belt

The Carlisle Raw-Edge Bandaid belt is a unique laminated construction V-belt. It couples the direct friction advantages of a raw-edge belt with the slip characteristics of a wrapped belt specifically for lawn and garden clutching drives.

  • Special Chemically treated polyester cord that enhances belt stability.
  • Multiple plies of fabric built into the belt for enhanced durability.
  • Ideal for Lawn and garden clutching drives
Image showing the Carlisle Belts Super AG-Drive Agricultural V-Belt an Agricultural Belt for Tractors, Combines, and Gators

Agricultural V-Belts

Our agricultural v-belts are produced with the most advanced materials in our US factories.

  • Premium EPDM rubber and aramid fibre cord for maximum durability and minimum downtime.
  • Smooth clutching covers for superior grip strength and reduction in belt slipping.
Image showing the Carlisle Belts Agricultural V-Belt an Agricultural Belt for Combines, Tractors, Harvesters and Gators

Agricultural Narrow Wedge V-Belts

Premium wrapped wedge belts for agricultural equipment with advanced rubber materials and smooth clutching covers for strength and performance.

  • Strong aramid cord and carbon construction for less stretch and more horsepower.

Polyutherane Flex V-Belt

We offer a range of unique 60° angle polyurethane construction v-belts that transmit heavier loads at higher speeds in less space than conventional v-belts. The polyurethane compound resists fatigue and wear and our precise curing process eliminates layers and overlaps for smooth running and low vibration

  • Working temperature: -65°F to +180°F (-54°C to +85°C).
  • Ribbed backing provides greater lateral stability and relieves bending stress
  • Ideal for machine tools, computer peripherals, medical equipment, library equipment, small appliances, blower drives and woodworking machines
Image showing the Double-Angle V-Belts by Carlisle Belts ideally suited for Serpentine Drives

Chicken Feathering Belts

We offer a unique belt for use on feathering machines in the poultry industry. Our feathering belts are a double sided raw edge construction that are used on serpentine drives.

  • Multi-ply raw-edge construction for greater traction and enhanced grip strength.
  • Transverse fibre rubber core provides increased durability and power transmission.
  • Superior belt length tolerances ensure our sets are perfectly matched.
Image showing the Bowling Ball Lift V-Belt by Carlisle Belts a V-Belt designed for use on Bowling Ball Lifts

Bowling Machine Ball Lift Belts

We offer a unique belt for use on bowling ball machinery known as the ball lift belt. Our Ball Lift belts are a one piece reinforced v-belt manufactured and cured with a robust tie band attached.

  • Multi-ply Ply Flat Tie band to avoid stretch.
  • Double wrapped fabric to provide durability and resistance to abrasion.
  • Resistance to degradable oils and minerals.

Double Angle Cogged V-Belt

Our premium raw-edge double-angle cogged belt is ideal for use on high power transmission serpentine drives.

The unique raw edge sidewalls provide an increased power transmission on both sides of the belt

  • Special raw-edge cogged double sided construction
  • Offers increased flexibility for use on very small pulleys

Download Our Brochure


MAKE AN ENQUIRY